The vid extension has a built-in concept of a video source.
At the moment, the only video sources available are movies in the directory the model lives in and cameras attached to the computer.
The vid extension opens a new video source with the vid:<source>-open and vid:<source>-select.
These primitives change the source to the selected source.
If a source is already open, it closes it before opening a new one.
Movie sources are “stopped” after being created by vid:movie-select or vid:movie-open.
Camera sources start off as “playing” after being created by vid:camera-select or vid:camera-open.
If a source is in status “stopped” it can be started with vid:start.
Conversely, if the source is “playing” it can be stopped with vid:stop.
When a source is “stopped”, each call to vid:capture-image will return the same image.
The vid extension also has the concept of a recording, a series of frames which can be sewn into an “mp4” movie.
The recorder status can be queried using vid:recorder-status.
The recorder status is “inactive” until started with vid:start-recorder, which sets it to “recording”.
While the recorder is “recording” the vid:record-view, vid:record-interface, and vid:record-source can be used to save frames to the recording.
You can choose to save the recording while recording using vid:save-recording which saves the movie to the specified file and reset the recording status to “inactive”.
If you would prefer to throw away the recorded frames without saving, use vid:reset-recorder.
vid:camera-names
vid:camera-open
vid:camera-select
vid:movie-select
vid:movie-open
vid:movie-open-remote
vid:close
vid:start
vid:stop
vid:status
vid:capture-image
vid:set-time
vid:show-player
vid:hide-player
vid:record-view
vid:record-interface
vid:record-source
vid:recorder-status
vid:start-recorder
vid:save-recording
Provides a list of all available cameras.
Example:
vid:camera-names => []
vid:camera-names => ["Mac Camera"]
vid:camera-names => ["Logitech Camera"]
Opens the named camera as a video source.
If no name is provided, opens the first camera that would be listed by camera-names.
Example:
vid:camera-open ; opens first camera
(vid:camera-open "Logitech Camera")
Errors:
"vid: no cameras found": no cameras are available."vid: camera "\<name\>" not found": if the named camera is not available.Prompts the user to select a camera as video source. This command does not error if the user cancels. Use vid:status to see if a user selected a camera.
Example:
vid:camera-select
Errors:
Prompts the user to select a movie to use as a video source.
The formats supported are those supported by JavaFX2.
This command does not error if the user cancels.
Use vid:status to see if the user selected a movie.
Example:
vid:movie-select
Errors:
"vid: format not supported": the user selected a movie with an unsupported format.Opens a video from the file system. If the provided path is not absolute the extension searches for the given path relative to the current model directory. If the provided path is absolute the extension opens the file.
Example:
vid:movie-open "foo.mp4" ; Opens foo.mp4 in the directory containing the model
vid:movie-open user-file ; Opens a dialog for the user to select a movie
vid:movie-open "/tmp/foo.mp4" ; Opens a movie from the "/tmp" directory
Errors:
"vid: no movie found": the movie could not be found."vid: format not supported": the user selected a movie with an unsupported format.Opens a remote video from a website or ftp server.
Example:
vid:movie-open-remote "http://example.org/foo.mp4"
Errors:
"vid: no movie found": The specified URL could not be loaded or errored while loading."vid: format not supported": The file type of the remote movie is not supported."vid: protocol not supported": The movie was at an unsupported URL protocol. Supported protocols are ftp and http.Closes the currently selected video source. Has no effect if there is no active video source.
Example:
vid:close
Starts the selected video source.
A video source must have been selected before calling vid:start.
Example:
vid:start
Errors:
"vid: no selected source": There is no currently selected video source. Select a source with vid:movie-open, vid:movie-select, vid:camera-open, or vid:camera-select.Reports the current status of an active video.
Note that after calling vid:movie-open or vid:movie-select the status will be set to “stopped”,
while after calling vid:camera-open or vid:camera-select the status will be “playing”.
Example:
vid:status ; => "inactive"
vid:movie-open "foobar.mp4"
vid:status ; => "stopped"
vid:movie-start
vid:status ; => "playing"
Captures an image from the currently selected active source.
If width and height are not specified, the image is captured at the current source resolution.
Example:
extensions [ vid bitmap ]
to capture
; capture an image if a video source is open,
; have the user select a camera if no video source found
carefully [
; when camera open, take an image
let image vid:capture-image ; returns image suitable for use with bitmap extension
bitmap:copy-to-drawing image 0 0
] [
if error-message = "Extension exception: vid: no selected source" [
vid:camera-select
vid:start
let image vid:capture-image
bitmap:copy-to-drawing image 0 0
]
]
end
If you want to capture images at a different resolution, simply replace vid:capture-image with, e.g., (vid:capture-image 640 480).
Errors:
"vid: no selected source": There is no currently selected video source. Select a source with vid:movie-open, vid:movie-select, vid:camera-open, or vid:camera-select."vid: invalid dimensions": The selected dimensions are invalid (one of the dimensions is zero or negative).Sets the time of the current video source to *seconds*.
This has no effect when the current video source is a camera.
Example:
vid:set-time 100
Errors:
"vid: no selected source": There is no currently selected video source. Select a source with vid:movie-open, vid:movie-select, vid:camera-open, or vid:camera-select."vid: invalid time": The currently active video does not contain the specified second. The second may be negative, or greater than the length of the video.Shows a player in a separate window. If there is no video source, the window will be an empty black frame. If there is an active video source, it will be displayed in the window with the specified width and height. If there is a playing video source, it will be displayed in the window at its specified width and height. If width and height are omitted, the video will be displayed in its native resolution.
Example with native resolution:
vid:show-player
Example with custom resolution:
(vid:show-player 640 480)
Errors:
"vid: invalid dimensions": The selected dimensions are invalid (one of the dimensions is zero or negative).Hides the player if open. Does nothing if there is no player window.
Example:
vid:hide-player
Records the current image shown in the NetLogo view to the active recording.
Example:
vid:record-view
Errors:
"vid: recorder not started": The recorder has not been started. Start the recorder with vid:start-recorder.Records the NetLogo interface view to the active recording.
Example:
vid:record-interface
Errors:
"vid: recorder not started": The recorder has not been started. Start the recorder with vid:start-recorder."vid: export interface not supported": The calling NetLogo version does not support interface exports. This will occur when running NetLogo headlessly.Records a frame to the active recording from the currently active source.
Example:
vid:record-source
Errors:
"vid: recorder not started": The recorder has not been started. Start the recorder with vid:start-recorder."vid: no selected source": There is no currently selected video source. Select a source with vid:movie-open, vid:movie-select, vid:camera-open, or vid:camera-select.Reports the current status of the recorder.
Initially and after the recorder is saved (via vid:save-recording) or reset (via vid:reset-recorder) the recorder status is “inactive”.
After calling vid:start-recorder the status will be “recording”.
Example:
vid:recorder-status ; => "inactive"
vid:start-recorder
vid:recorder-status ; => "recording"
vid:reset-recorder
vid:recorder-status ; => "inactive"
Starts the recorder. If the recorder is already running this will cause an error to be raised. If desired, a recording width and height can be supplied. If width and height are not supplied, they will be determined from the first frame recorded.
Example:
vid:start-recorder
(vid:start-recorder 640 480)
Errors:
"vid: recorder already started": The recorder has already been started. The existing recording should be saved or reset before starting the recording."vid: invalid dimensions": The selected dimensions are invalid (one of the dimensions is zero or negative).Saves the recording to the specified path.
If the recorder is not running this will cause an error to be raised.
Note that at present the recording will always be saved in the “mp4” format.
If the supplied filename does not end in “.mp4”, the “.mp4” suffix will be added.
Note that vid:save-recording will overwrite existing files of the same name.
vid:save-recording will error if the recorder has not been started or if the file cannot be written since the containing directory does not exist.
Example:
vid:save-recording "foo.mp4" ; Saves to foo.mp4 in the directory containing the model
vid:save-recording user-new-file ; Opens a dialog for the user to select a save path
vid:save-recording "/tmp/foo.mp4" ; Saves the recording to the "/tmp" directory
Errors:
"vid: recorder not started": The recorder has not been started. Start the recorder with vid:start-recorder."vid: no such directory": The directory containing the specified save file does not exist."vid: no frames recorded": You tried to save a recording with no frames recorded. Check that you are recording properly or use vid:reset-recording to to change the recording format without saving.